To the aid of a variety of special materials with multi-component structure and properties of the narrowly specific application, the production is carried out specialized enterprises. With the advent of product Remmers SD 1 begins a new era of opportunities for application, resistance to stress and technological characteristics. SD 1 product is applied as a standard mineral The sealing system, ie can be applied as a slurry and coating on the walls and floors of buildings. In this case, depending on the load, you can create layers of different thickness, it is also possible to apply multi-layered. After a short time after the seizure, reliable protection is achieved and the absolute sealing of the building element. Blast furnaces Sewer Collectors Mining Agriculture chimneys Biogas Plants Sewage Treatment Plants Waterproofing slurry Remmers SD 1 1-component product is mixed only with water, the highest level of adhesion to the substrate, including the glazed surfaces, exceptional resistance to acids, alkalis and solvents, in accordance with DIN EN 12 808, an extremely high resistance to mechanical stress, resistance to stress, created during the cleaning process under high pressure, up to 120 bar at 150 C heat resistance up to + 500 C completely inorganic product does not require mandatory labeling, can withstand water pressure to 5 bar. The highest level of adhesion to smooth relying solely on chemical stability in comparison with other products Excellent mechanical stability of the resistance to heat up to +500 C 1.

Priming product Remmers Kiesol elements that prevent the adhesion must be removed, for example, by sandblasting or by using the Rotec sanding machine. Remmers Kiesol primer in a 1:1 ratio with water is applied evenly to the surface. 2. Mixing Remmers SD 1 Product Remmers SD 1 is poured into 600-650 ml of pure water and stirred with a stirrer for 60 seconds. The product “mature” for about 4 minutes, after which again stirred for about 60 seconds.

3. Shpatlevanie “on cider Remmers SD 1 for packing (sealing), then the ground surface, while the reaction product Remmers Kiesol, top Shpatlevanie “in cider” is applied Remmers SD 1. 4. 1st slime layer Remmers SD 1 As Shpatlevanie alternative “to the cider” (see step 3), the first layer of sludge Remmers SD can be applied to a wide brush (in the reaction Remmers Kiesol). 5. 2nd layer of sludge Remmers SD Apply a second layer of sludge can be carried out over the first layer of slurry (see Step 4) by “fresh on fresh).