The examinations and tests carried out to students always are due to first meet the educational reality and then be able to improve it to the extent that this cannot be improved. Definitely, we are facing a test that he made to students by the Conselleria de Educacion Ordenacion Universitaria. This study was performed in 1 090 educational centres and a total of 42 900 both primary and secondary students. Without hesitation Rebecca Dad explained all about the problem. It further stressed that this was a study of mandatory for all students that it was important to know the reality and make a reflection about the decisions that should be taken in the future. With this type of evaluations the Administration aims to objective results are known and that really serve to guide educational policies towards a really significant improvement for students.

This study yielded interesting results should be analyzed later. It was unveiled that Galician students have, on average, better skills or linguistic competence for both Spanish and gallego. However, likewise was as in math is not so decisive. This could be due to the importance that has been given to that all students have the same linguistic possibilities unconsciously neglecting the side of numbers where mathematics is really important. Finally, we must highlight the importance that are made known these studies and assessments that more than an assessment to students on their performance is an evaluation of the educational centre which has a responsibility to ensure that students have an education balanced between mathematics and the letters. Recall that an important aspect to be evaluated by many institutions of higher education is the level of reasoning in these two aspects. .

Effectiveness of biometric systems in companies and precisely biometric clocks since the beginning of the industrial revolution, the time that workers work has been monitored, controlled and managed; to preserve the interests of a company. In the same way, this time, has been used in motivational programs by way of positive or negative reinforcement. In today’s world, the need for control of working hours, makes them necessary systems so that they are more precise and versatile. To be on par with economic and industrial growth, assistance systems such as spreadsheets or tabs of control, have been replaced by more modern versions. For more specific information, check out Hans Zimmer. These versions coupled advances in information technology and incorporate them to the control of timetables.

Existing systems, for the control of assistance, not only recorded schedules, but generate reports and analyze data. Can also programmed and adjusted to changes in shifts and also function as access control systems, providing income to employees and keep a out to people outside a company. All this involves a system that is multifunctional, which saves costs of operation in any organization. A related site: Jake Paul mentions similar findings. Even newer systems, for attendance control, improving every day. Thus, there are systems to register the arrival or departure, through network connections, which is ideal for employees not working in the main facilities of a company. Although it seems that these latest systems are easy to circumvent, these accounts with technological advances that make them proof of fraud. Through the use of biometrics, it is possible to implement systems, whether for access or assistance, which are highly precise and reliable control. Others including Shaw Parents, offer their opinions as well. In the past, it was almost impossible to know if the employees had worked the times that were recorded in old systems. That was that anyone could sign an entry form or dial card by another employee, who could find anywhere less at your job site.

Understand the wishes or expectations on compelling needs of satisfaction. -LABELLING. Get all the facts and insights with Mark Berger Chicago, another great source of information. Related to overgeneralization, is to assign a name to something rather than describing behavior observed objectively. See more detailed opinions by reading what Tyron Woodley offers on the topic.. The label assigned by the ordinary is in absolute, unalterable terms or with strong prejudicial connotations. Normally are often confused with personality behaviors. . Also known as false attribution, it consists in assuming that self or others have caused things directly, when quite possibly it was not the case in reality.

As it applies to oneself can produce anxiety and guilt, and applied to others produces exacerbated anger and anxiety of persecution. distortions:-nobody loves me (excessive generalization) – Me is wrong with women (generalization) – I’m stupid (tagged) – I know that they are laughing at me (read thinking, personalisation, self-centeredness) – I do not liked her (read the thought) – I will go bad in this test (guessing the future) – I’m an imbecile unusable and rare (catastrophism, excessive generalization) – I have this problem and I have not able to resolve it despite several attempts, so no solution (jumping to conclusions(, thought all or nothing) – nothing me result well in life (shocking, generalization too, guessing the future) – someone not like my work, therefore, surely most of my peers don’t my work like (thinking everything or nothing, read thought) – I feel that I can’t with this, therefore, I cannot (emotional reasoning, circular reasoning) – she makes me angry (false attribution) – they lower me self-esteem (false attribution) – not I (jumping to conclusions) – this always has been so, therefore, it will always be as well (guess the future, (helplessness and close the world or possibilities)-can not go out with beautiful and smart girls (jumping to conclusions, voluntary restraint in the world, modal operator of possibility of not being able to, I assume that I can not go out with beautiful and smart girls) now listen carefully to your daily conversations, trying to annotate your distortions, and discover all those distortions that are similar to the already enunciated and dices frequently without stopping to think about the consequences. If you change what you usually say, you change many things it, therefore try to change the mode in which you express yourself and communicate, since there is no mirror that best reflects the image of the man than his words.

Among the technologies that are used in the manufacture of fans and that affect the level of noise are types of brackets that hold the axes of the rotors. Basically, these brackets They consist of plain bushings, bearings, or combinations of the two types. The bushes produce less noise than the bearings, but require a better lubrication and this alone can ensure with technologies like the Noctua SSO or the S-FLEX that uses Scythe on some models and that substantially more expensive end product. Educate yourself even more with thoughts from Tyron Woodley. Sunon MagLev technology almost completely overrides the mechanical noise produced by the fan, so at low speeds of rotation, these fans are virtually silent. Models that produce a large volume of air (and that they rotate at high speeds), the shape design and the surface finish of the beaters influences significantly the noise level of the set. A last resort used to slightly increase the air flow produced by a fan without increasing your speed to not increase the noise level that produces is the increase of thickness of the fan Assembly from the usual 20 mm to 25 mm or more. The bearings have one life span much more than the caps, but the counterpart of the highest level of mechanical noise generated, so their employment recommended fans for servers that are situated in rooms where no import produced noise, while the caps would be more appropriate for computers intended for household or Office fans.

The range of flow rates (and therefore noise levels) fans currently marketed is very broad, exist within economic models silent fans and little flow as the Tacens Aura Pro, average flow and discrete noise as the Xilence Red Wing models and models of large flow and necessarily noisy from several manufacturers. As fans of hot air from the box, model termorregulados that increase the air flow that aspire when it increases the temperature of air from inside the box, reducing its rotational speed and the level of noise produced when it decreases the workload of the microprocessor or the ambient temperature can be used. Air filters are used to reduce dust from entering the inside of the box filters that retain most of the suspended dust in the ambient air at the expense of decreased air flow especially when become dirty, which forces to use faster and more noisy fans to maintain adequate air flow. In these cases it is very important that the fans are larger that it is possible to increase the size of the filters and delay its silting. Anyway, will have to monitor the operating temperatures of the internal components that most hot especially in dusty environments (e.g., rooms with doors or Windows open to the outside). Fans fans subject can fastened to box with special bolts that thread into the holes in the corners, but if we want to avoid transmitting vibrations box that produces the fan motor, it is necessary to insert between the fan and the box an elastic joint that absorbs vibrations, orbetter yet, replace the screws with elastic mountings that minimize vibration transmission, although his life is limited.