Laser Cutting – Perforate

The use of laser technology enables the flexible, fast, and repeatable cutting and perforating silicone gaskets silicone gaskets more are often used in budgetary matters to the sealing of electron devices such as ovens, refrigerators, dishwashers, and much. You may find that Ruth Shin can contribute to your knowledge. For these seals to enable but also a complete and defined the respective door closing, these must be fitted with venting options, so no annoying air cushion built up. These ventilation options are often still conventionally associated with stamps or knives, to realize holes or even slot-shaped geometries. However, this technique has the disadvantage that all classical tools are subject to wear and the quality of editing is not always constant. Persists the problem that silicone seals are usually very soft and therefore offer no good resistance, for example, at the stamping mechanical machining. Even when cutting with a mechanical procedure that is high elasticity of seals a major problem.

All existing problems can be eliminated as far as possible through the use of laser technology. A laser system is subject to no mechanical wear, thus the processing always constant quality takes place. Since the laser also not machined material, also no danger, that deforms the workpiece, for example, a silicone gasket during processing and therefore negatively affected the result. Another advantage of the use of laser technology is, that a variety of geometries can be realized using the same tool in a processing speed without having to change a tool. As well, an important point is the high speed with the laser machining processes are possible by choosing the most suitable laser system. As a system supplier of such and other laser systems, we design complex special solutions and develop new procedures with you.

Cryogenic And Laboratory Labels For Sample Tubes, Microscope Slides And Microtiter Plates

The Scienova has developed a unique assortment of various laboratory and Kryoetiketten from Jena cryogenic and laboratory labels for sample tubes, microscope slides and microtiter plates for the professional designation of reaction vessels and the GLP compliant work in the laboratory. The labels hold even under extreme conditions, such as storage in liquid nitrogen, in autoclaves, solvents, ethanol etc. The Scienova has the right label for all laboratory consumables such as sample tubes, slides, micro titer plates, Cryo tubes, glass jars or Cryo boxes. The applications include, for example, research institutes, biotechnology, agriculture, environmental, forensic pathology, histology, molecular biology, and other scientific disciplines. There are two different materials available depending on the required usage. A material developed for the Kryoeinsatz, which can be used in a temperature range of 120 C to minus 196 C. For use in A particularly durable material available is from a temperature from 120 C to minus 20 C. The labels can be printed with a commercially available laser printer absolutely user friendly.

The texts, bar codes or numbers on the labels can Wizard on the labels are printed using a free Web-based software, the so-called label printing. Here the user can either enter the data using the keyboard or upload your own Excel table. By printing with laser printer, the information on the labels are indelible and absolutely sharp. By using the existing laser printer and a free software only the labels costs for the user. There any thermal transfer printers or expensive software must be purchased. Sample marking as easy as never! Company portrait: The Scienova develops products for marking in laboratories, which are used worldwide by research institutes in biotechnology, agriculture, environment and forensics. For the use of the Products must be purchased no special printers or software.

Fraunhofer Network

It turned out that flexible usage options and a non-bureaucratic procedure of a promotion due to the individual requirements of the spin-offs are especially important. The resulting concept for an internal Fraunhofer funding measure convinced recently also the Board of Directors of the Fraunhofer-Gesellschaft. Can in future FFM Fraunhofer promotes management “company of the Fraunhofer-Gesellschaft up to 100,000 euros will be provided, to have external consultants individual milestones to get individual coaching or an experienced CEO ad interim or long term. engage. Networking and entrepreneurship education with three annual events also offers the Fraunhofer venture all Foundation interested the possibility of issues around to make the range of spin-off fit: Fraunhofer researchers engaged in various focus on founding a business simulation seminar and learn this first business basics. In the center of the Fraunhofer Network shops is on the one hand, the exchange of experience between founders and founding interested as well as between researchers and consultants on the other side.

The Fraunhofer Investment Forum offers a platform to present startups various donors and to make important contacts for possible funding. Learn more about Fraunhofer venture found at. Latest news and the opportunity to contact and questioning are possible in the Fraunhofer-venture XING group. The Fraunhofer-Gesellschaft operates more than 80 in Germany Research institutions, of which 66 institutions. More than 22,000 employees and staff, predominantly with natural or ingenieurwisenschaftlicher training, edit the annual research budget of EUR 1.9 billion. As a partner of a spin-off of the Fraunhofer-Gesellschaft, Fraunhofer institutes, industry and investors, Fraunhofer venture supports scientists from the Fraunhofer-environment on their way to the own technology company. The range of services includes the areas technology, establishment, financing and investment management. Meanwhile, over 200 companies from the Fraunhofer research topics could be successfully established since 1999.

Lisa Neumann University

The throwaway times of scarcity make inventive counterpart people. No other country has proven this more than the DDR. The art of engineering reached a level where it could compete with the contemporary competition in the West. The portal for online auctions presents rarities, which until now have lovers and maintain. The Robotron brand stood for computer technology and electronics. To a large extent, the combine produced for industrial use.

But also in home electronics, Robotron had the nose front. Hardly a young adult who saved not for years on a cassette recorder. He cost at least 1200 mark and was more expensive than a SLR camera. No wonder that the people treated the equipment carefully. No trace of the throwaway society, which today has become. On the contrary, some nostalgic photograph today with their pentacon EXA 1a or go with the Trabant to work.

That is impressive proof of the longevity, that engineers have given to their products. Not that East German products were flawless. But almost everything was repaired and was restored in stand. Unlike the appliances of today. So it not worth usually replace the electronic module in a dishwasher. The manufacturers are today mostly on buying new instead of repair.

Grill Cleaning

Can nanotechnology be eco-friendly? Nanotechnology can be not only environmentally friendly, but even bio-degradable. Latest germanworld-Nano-cooperation enables the use of nano-products in the field of cleaning and nano-coating, which are even gentle and organic than original cleaner. Germanworld nanotechnology enables new collaborations in the nano-research and development biological high-tech nano-technology. CrustiX is a highly active, friendly and environmentally conscious cleaning and simultaneous sealing of oven, baking pan, Grill, fireplace glass and microwave out of nelumbo Nano series. Cleaner for ovens there are countless, but a cleaning and nano-sealing in one step is unique. Conventional cleaners, specifically for the oven, are extremely corrosive. Nelumbo CrustiX is a special development was especially for heavily encrusted baking equipment and baking sheets in industrial bakeries. It is applicable to enamel, ceramics, glass, aluminium, copper, brass and stainless steel.

Nelumbo CrustiX germanworld nanotechnology a timesaver reached applications download up to 85% of the cleaning cycle. Taking into account environmentally conscious aspects, nelumbo CrustiX was developed and approved in Europe for the food industry. Nelumbo CrustiX has a quality certificate according to European standards, Adhesif is biodegradable, and non-corrosive. Germanworld nano technology complements its offer to an innovative product with nelumbo CrustiX. Information at press team germanworld nanotechnology A. Schmidt

Albert Einstein Physics

Can the modern physics explain Paranormal phenomena? May, the physics is facing a fundamental discovery. Recent results from quantum physics suggests that that there are physically write soul States that continue to exist after the death of a person. The quantum physics phenomenon of entanglement provides the Foundation for the incredible. This is a totally strange effect on the met Albert Einstein. Instead of taking him under the scientific scrutiny, he spoke of a doubted action at a distance\”, which he later put to the files. Recently Vienna quantum physicist Professor Anton Zeilinger experimental evidence delivered on the basis of entangled photons, that this effect in reality actually exists.

The entanglement principle States the following: when two quantum systems interact in interaction, these should be considered henceforth as a total system. This entanglement is maintained even if the time interaction in the past lies and the two subsystems now over large distances are separated. The consequences of this effect recall already supernatural phenomena, as a thought experiment shows: in this, an experimenter in a random place on Earth performs a measurement of a particle A. This particle with one other particle B is entangled, so the latter is affected simultaneously by this measurement. It is doesn’t matter, whether the distance between particles A and B, for example, 100 meters, 1000 kilometres or even light years from Earth. And as said the interference takes place at the same time, not with speed of light, but infinitely fast! Now some physicists conclude that at least parts of the animate and inanimate world are crossed with each other and communicate with each other in subtle ways since the cosmic big bang. To these belongs to the instance Professor Dr. Hans-Peter Durr, former Director of the Max Planck Institute for Physics in Munich. Durr represents today Considers that the dualism of smallest particles on the subatomic world but is rather ubiquitous.

Green Energy

Carbon dioxide neutral ion in the tank instead of bothersome environment petrol or diesel? The electric motor for automobile propulsion is no future long ago. Darmstadt, December 09, 2009 – just powerful and long-lasting car power storage supply vehicles with sufficient energy for longer distances. Merck’s researchers recently developed one of the most important components for: electrolytes for lithium-ion batteries of the next generation. The use and the development of alternative automobile drives are among the central topics of the present. Environmental protection has finally moved into the consciousness of the industry, Green Energy\”is considered key for a clean future. Also the rising cost of gasoline and diesel fuel can be louder call for power-driven vehicles.

One of the biggest challenges in the production of vehicles with hybrid or electric motor is to develop of more efficient electricity storage. New materials and chemicals are the key. As a result, the pharmaceutical and chemical company Merck invested in a the same research and advocating for the development of more efficient power saving. This research project are part of three funded projects. In the framework of the project of Lina core\”, Merck researchers develop novel electrolytes using their energy density and durability of lithium-ion batteries in hybrid or electric vehicles could be increased substantially. In a further cooperation with the University of Erlangen, the Merck experts develop their electrolytes: by suitable additives they improve it so that the electrodes in the required temperature range of minus 25 to plus 80 degrees Celsius is work. In the project of Li-five\”, it comes to develop cells with a voltage of 5 volts. It is important to increase the energy density of the battery and thus the range of electric cars.

All three projects are in collaboration with renowned partners. Dr. Michael Schmidt, project manager lithium-ion batteries at Merck, explains how important the close intermeshing of Merck with the partners of the Research projects: the correct interaction of all components is important.

Powerful Enzymes

Start research cooperation Henkel Henkel and c-LEcta and c-LEcta have started a cooperation in new enzymes to the development of more sustainable detergent. The cooperation partners focus on even better removing stubborn stains that are especially relevant for consumers. In the joint research project identified and improved c-LEcta suitable enzymes by using their proprietary technology. Henkel checks based on his extensive experience in the development of detergent enzymes and formulations which ingredients are best suitable for better stain removal after a wash cycle. Enzymes are established components of modern detergents.

It is that detergent already at low temperatures efficiently remove a variety of stains to a considerable extent the merit of enzymes. In addition, they contribute to the preservation of tissues in the washing process. Through continuously improved enzymes, detergents can now make an important contribution to sustainability particularly energy – and resource-friendly formulations. Our goal is to enable the Consumer products to offer, showing a better performance at a lower ecological footprint”, says Prof. Dr.

Thomas Muller cherry, Corporate Senior Vice President R & D and supply chain laundry & home care at Henkel. We have decided with c-LEcta for a partner who has a high level of expertise for the development of process-optimised enzymes and clearly focused on delivering market-ready solutions. We are convinced that better enzymes to make a decisive contribution to the development of innovative detergent because they combine a high washing performance with the highest sustainability standards.”we are delighted to work with a strong partner like Henkel, and to contribute to develop sustainable detergent” added Dr. Marc Struhalla, co-founder and CEO of c-LEcta. We have already shown in various collaborations that the enzyme variety of our Biodiversitatssammlung together with our efficient technologies of engineering-valuable building blocks for the development of Bio-catalytic solutions are showing outstanding performance in challenging processes. We also present already great success in the development of products that can be integrated directly into the processes of our customers.” Henkel operates worldwide with leading brands and technologies in the three business segments of laundry & home care, beauty care, and adhesive technologies. The 1876 founded company holds leading global market positions in the consumer and industrial business with around 47,000 employees and famous brands such as Persil, Schwarzkopf or Loctite. In the fiscal year 2012, Henkel scored a turnover of 16.510 million and an adjusted operating profit of 2.335 million. Henkel preferred shares are listed on the DAX. c-LEcta is a specialist of in industrial biotechnology and develops customized enzymes and microbial production strains for sustainable and economical industrial processes. The Leipzig-based company covers with the discovery of new enzymes, whose engineering as well as the commercial production of specialized enzymes and tribes from a wide range of the value chain. Academic excellence combined with profound commercial and regulatory expertise allows it to bring innovative and competitive organic processes up to the scale of the product.

New Observations

This discovery prompted the search for other planets, such as the orbital distortions attributed to gravitational perturbations affecting the Mercury. However, none of them have not been found, and, ultimately, it was concluded that the orbital distortion observed in the Mercury, due to relativistic effects. Nevertheless, this method of prediction (logical calculations) of the planets on the basis of orbital "oddities" planet, perhaps first used outside of our solar system. Extrasolar planet, known as TrES-2b, is an exceptional case, being one of the known extrasolar planets, whose orbital plane is almost completely coincides with the ray observations from the Earth. This fact implies that each time around the star, the planet would appear, passing across the disk of stars. While we can not expand this cd on the shelves, he reveals the characteristic decrease in the star brightness, which, in turn, provides additional information about the system, such as' very precise calculations of the radii of the stars and planets (the relatively large axis) and the angle of inclination of the orbital plane of the planet. " This additional information allows for precise calculations of the orbital parameters that are necessary for predicting future transits. A group of German astronomers conducted surveillance of TrES-2 in 2006 and 2008 to develop his idea of the planet's orbit.

However, when they continued observation in 2009, we found a significant change of parameters such as angle of inclination plane of the orbit and orbital period. Although such a change in the parameters could be explained by the migration of planets, astronomers did not expect that this phenomenon can occur in such a short span of time scale. Except addition, the change could explain the "strange" form of the primary star, but the degree to which would have to flatten the star at the equator, was unrealistically high, given the slow speed of TrES-2. The study authors suggested a third option: 'existence of the third celestial body in the form of another planet would give quite a plausible explanation. " Although this explanation is totally unsubstantiated, it offers easily verifiable scenario.

If the orbital plane of the system almost coincides with the ray observations from the Earth, it is the most ideal situation to try to detect the planet using the radial velocity of the parent star. Authors go so far that even offer a range of cycle times of the potential of the planet, for which the possible effects observed. They say: 'planet mass in a mass of Jupiter and the orbital period of 50 to 100 days – quite sufficient conditions to cause the observed changes in mood. " Moreover, the authors note that knowledge of the existence of several similar systems with one planet and another near a massive planet that refers to the longer orbit. 'The system hip 14810 has a near-planet with orbital period of 6.6 days and a little more light planet with orbital period of 147 days, in the hd 160691 planet has a short-range period of 9.6 days, and two long planets with masses of Jupiter, is known to have periods of 310 and 643 days. "